RF Safe® QuantaCase™ RFS1 Anti-Radiation Phone Case RFID Blocking
The QuantaCase™ RFS1 incorporates world-renown RF Safe® Radiation Shielding Technology, deflects electromagnetic radiation, including 5G frequencies, and is deflected via conductive shielding fabrics in the front cover. In addition, the QuantaCase has an exposed RF Safe® notch where an inexpensive Ohm meter can be used to test the conductivity of the microwave barrier between your body and device! Unlike most products that require expensive microwave meters to verify what is inside, the highly conductive RF Safe® shielding fabric inside the QuantaCase™ RFS1 is accessible for easy conductivity testing. Shielding only covers the front of the phone, so it will not interfere with its antenna.
ANTI-RADIATION AND SINGLE SLOT RFID BLOCKING WALLET CASE FOR THE
So much more than just a phone case. The RF Safe® QuantaCase™ RFS1 contains lab-tested microwave RF shielding technology that can reduce excessive radiation exposure over a wide range of radio frequencies from your . This includes 5G, Wi-Fi, and cellular, all high-frequency microwave cell phone radiation bands. It also contains a built-in RFID-blocking wallet and turns into a phone viewing stand, all in one lightweight and convenient case.
Anti-Radiation — RF Safe® microwave radiation shielding material is integrated into the front flap of the outer case to deflect radiation (5G, Wi-Fi, EMF, etc.) away from your body while still allowing the signal to enter and exit the back of the phone unimpeded.
RFID Blocking Wallet — the built-in card slot provides RFID theft protection for a credit card, room key, or any RFID remote access card while the phone case is closed.
Protective Cases — QuantaCase™ RFS1 protects from cracks, dings, and scratches to keep your phone looking and performing like new.
Adjustable Angle Stand — Easily convert your QuantaCase™ RFS1 into a stand for watching videos on your .
HOW IT WORKS
Close the radiation shielding front flap after taking/making a phone call and speak as you usually would. The microphone and speaker are fully functional for private calls; however, it is highly recommended to use the speaker phone option wherever possible. Distance is always your best friend when it comes to EMF exposure.
When storing in your pocket, face the front flap towards your body to deflect the most intense line of sight radiation away from your body.
When texting, the flap can be folded behind the phone to shield the back of the while held in your hand for texting. The front of the device is typically at a “safe” distance from the body under this condition, where your hand absorbs most of the radiation when texting. The RF Safe shielding should always be between the device and the closest part of your body to the phone!
Now you can reduce exposure to cell phone radiation in style! RF Safe’s QuantaCase™ RFS1 radiation shield discreetly provides layers of RF radiation protection where it is most needed. The RF Safe QuantaCase™ RFS1 isn’t just about improving the look of your or being an essential accessory for protecting your new iPhone.
The RF Safe QuantaCase™ RFS1 for the protects the most important thing by simply reducing the amount of radiation absorbed in your head and body.
Most materials are transparent to microwave radiation from smartphone devices. As a result, microwave energy is absorbed into a user’s body closest to where the cell phone is being carried or used. The QuantaCase™uses specially placed materials that deflect the most intense microwave radiation from smartphone devices away from you.
When a phone is used with a heads-free device and the phone is carried in your pocket, radiant energy is absorbed much faster than at the head because tissues and organs such as the liver, kidneys, or reproductive organs provide much better conductivity than the skull and simply put most of your body’s major organs have no bone protection like the brain does.
The essential requirement of any cell phone radiation shielding is that it is electrically conductive. The QuantaCase™ RFS1 is lined with highly conductive RF shielding materials designed to deflect cell phone radiation away from your body. Testing the conductivity of shielding material inside the QuantaCase™ RFS1 is an inexpensive way to verify the material being used supports the physics necessary to reflect microwaves and provides a conductive barrier between your and your body.
Materials Used for Electromagnetic Radiation Shielding
RF Shielded fabric is made from polyester filaments woven with a blend of micro-fine conductive threads. The shielding fabric is combined with a proprietary process for deflecting potentially harmful radiation.
RF Safe QuantaCase™ RFS1 Shielding Mesh is visible inside the earpiece speaker hole, which allows the metal alloys used in the RF shielding to be tested for conductivity. Conductive adhesive layer the shielding mesh seamlessly in full compliance with EU Nickel Directive 94/27/EC.
Designed to deflect radiation from smartphones
The RF Safe QuantaCase™ RFS1 only incorporates shielding mechanisms that utilize deflection. Absorption (attenuation) is never used to prevent affecting the software regulating RF power output. RF Safe only uses absorption technologies on wires (Ferrite Beads), such as on an air-tube headset plugged into your device.
How QuantaCase™ RFS1 Electromagnetic Radiation Shielding Works
Electromagnetic radiation consists of coupled electric and magnetic fields. The electric field produces forces on the charge carriers (i.e., electrons) within the conductor. As soon as an electric field is applied to the surface of an ideal conductor, it induces a current that causes charge displacement inside the conductor that cancels the applied field inside, at which point the current stops.
Varying magnetic fields generate eddy currents that repel the applied magnetic fields. The result is that electromagnetic radiation is reflected from the conductor’s surface.
QuantaCase™ RFS1 deflects excessive radiation, as shown in the illustration. By simply keeping the shielded flip cover between your body and device, whether used to your ear or carried in your pocket – you have the shielding you need to cover the entire front of the phone to deflect potentially harmful excess radiation.
RF Safe QuantaCase™ RFS1 for
-Specially designed for
-Provides excellent protection for
-Premium QuantaCase™ RFS1 has precise cutouts for the device
-Full access to all ports and buttons on
-Magnetic side latch to keep shielded flip cover closed
-Adjustable stand with muti-viewing angles; Perfect for video-chatting and movie-watching
-Slim fit design; Combines Phone Protection and Radiation Protection
-Newer Phones Currently Available in 4 colors
Over two decades of experience in the best ways to reduce cell phone radiation exposure is only a click or call away!
For more information about the RF Safe QuantaCase™ RFS1 product line for cell phone radiation safety, please call 1 (844) 473-7233
RF Safe® and QuantaCase™ RFS1 have registered trademarks owned by Quanta X Technology LLC, Seminole, Florida, USA.
Apple iPhone 14 SAR test reports filed with the Federal Communications Commission FCCID BCG-E8138A— the Specific Absorption Rate (SAR) Apple iPhone 14 is: 1.15 watts per kilogram (w/kg) at your head and 1.16 W/kg when worn on your body. The Apple iPhone, 14 hotspot SAR, is 1.161 W/kg, and its SAR for max simultaneous transmission (cellular plus Wi-Fi) is 1.517 W/kg when used as a hotspot simultaneously with other active transmitters. There is also an Apple iPhone 14 SAR rating for head and body simultaneous transmission usage (cellular plus Wi-Fi). Simultaneous transmission at your head absorbs radiation at 1.395 W/kg, and simultaneous usage at the body is 1.507 W/kg.
It’s official; size does matter…. Well, a little, according to Apple! The latest Apple iPhone SAR report found that “The Housing size is shown to have a small impact on the SAR and E-field values. It can be observed that the housing with a smaller size will leak the most from the side.”
So people that bought the smaller iPhone might be getting more than they bargained for, like just a bit more radiation penetrating the brain. How do these little-screen iPhone radiation leakers compare to the big-screen iPhone models? Let’s put the size difference into perspective. The following graph shows the radiation surrounding a small and large iPhone form factor. As stated in the report, “It can be observed that the housing with a smaller size will leak the most from the side. “. Unfortunately, this isn’t readily available radiation exposure information, as it takes a fair amount of digging to find the official reports. However, I think every consumer has a right to know that the phone’s form factor can influence the amount of radiation the body absorbs.
Versions: A2882 (International); A2649 (USA),BCG-E8138A ; A2881 (Canada, Japan); A2884 (China, Hong Kong); A2883 (Russia)